With design elements modelled after Audio-Technica s popular 3000 Series UHF Wireless Microphone Systems, the 3000 Series IEM features a rack-mount transmitter with front-panel controls and large OLED display, body-pack receiver with an efficient headphone amp (it also conveniently charges in the same ATH-CHG3 and ATH-CHG3N charging stations as the 3000 Series UHF body-pack transmitters), and ATH-E40 professional in-ear monitor headphones with propriety dual phase push-pull drivers. Together these elements provide clear, natural sound quality on any stage.

The 3000 Series Wireless IEM offers exceptionally wideband UHF coverage, available in frequency band EG2 (650 – 693 MHz); receiver antenna diversity to ensure RF stability; and stereo or mono operation with pan personal mix controls. Additional features include network monitoring and control via the Audio-Technica Wireless Manager software, a cue mode that allows an audio engineer to monitor several IEM channels from a single receiver, and a 3000 Link mode that enables compatibility with 3000 Series wireless microphone components.

Mixing and performing on a smaller scale shouldn’t have to mean sacrificing sound quality. Through the 3000 Series Wireless In-Ear Monitor System, Audio-Technica continues to deliver on its promise of making high-quality audio accessible to all.

Warranty: 12 Months

Features

• Durable wireless in-ear monitor system delivers high-quality sound and stable RF
• Ideal for use in houses of worship and performance venues
• Optimized internal digital signal processing provides exceptional stereo separation
• Wide UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in frequency band EG2 (650 – 693 MHz)
• Shares design elements with the 3000 Series UHF Wireless Systems for easy integration and compatibility
• Transmitter and receiver include OLED screens for optimal readout of key settings and alerts
• Offers network monitoring and control via Wireless Manager software
• A channel plan can be deployed to all network-connected transmitters via an RF scan from a single receiver, with no interference or third-order intermodulation
• Body-pack receiver operates continuously for up to 7 hours when powered by NiMH batteries and charged in the ATW-CHG3 or ATW-CHG3N charging station (sold separately)
• Stereo or mono operation with pan personal mix controls
• Receiver is equipped with an efficient headphone amp to ensure clear, natural sound quality
• Custom audio settings include EQ, limiter, gain control and balance
• Receiver’s antenna diversity improves RF stability
• Included ATH-E40 professional in-ear monitor headphones feature propriety dual phase push-pull drivers for exceptional accuracy and clarity
• Transmitter is equipped with balanced XLR inputs and loop output, plus network port

• Specifications

  Overall System
  Operating Frequencies		Band EG2: 650 to 693 MHz Please note that some frequency bands might not be available in your territory or could come with a limited tuning bandwidth transmitting power due to local regulations.
  Minimum Frequency Step		25 kHz
  Modulation Mode		FM
  Nominal Peak Deviation		±34 kHz nominal ±45 kHz peak
  Frequency Response		40 Hz to 14,100 Hz
  Stereo Separation		75 dB
  Operating Range		90 m (300 ) Open range environment with no interfering signals
  Dynamic Range		>90 dB, A-weighted, typical
  Total Harmonic Distortion		<0.2% (at 1 kHz, +4dBu input)
  Maximum Simultaneous Use (recommended)		49 ch per band For assistance with multi-band operation or other frequency coordination issues, contact your local Audio-Technica dealer.
  Notes		For product improvement, the product is subject to modification without notice.

  IEM Transmitter
  RF Output Power		High: 50 mW, Low: 10 mW (switchable) at 50 ohms May differ depending on the country or region in which you live.
  Input Connection		XLR-F type×2 (Pin1: GND, Pin2: Hot, Pin3: Cold)
  Maximum Input Level		XLR-F type: +24 dBu (at 0 dB sensitivity)
  Output Connection		6.3 mm (1 4 ) TRS×2 (Tip: Hot, Ring: Cold, Sleeve: Ground）
  Network		100BASE-T
  Network Port		RJ-45
  Power Supply		100 to 240 V AC (50 60 Hz) to 12V DC 1 A (center positive) switched mode external power supply
  Antenna Output		BNC-type, 50 ohms
  Dimensions		210 mm (8.3 )×191 mm (7.5 )×43.4 mm (1.7 ) (W×D×H)
  Weight		1,100 g (39 oz) (without accessories)
  Included Accessories		AC adapter Rack-mount (large, small) Flexible UHF antenna

  Receiver
  Receiving System		Antenna diversity Audio output cable performs as a secondary antenna to ensure stable RF performance.
  Image Rejection		>80 dB, typical
  RF Sensitivity		20 dBuV at 60 dBA S N ratio (50 ohms termination)
  Headphone Output Jack		3.5 mm (1 8 ) TRS stereo mini-jack
  Headphone Output		40 mW (at 12 ohms)
  EQ		Low: 80 Hz 160 Hz 320 Hz ±9 dB in 3 dB step High: 6 kHz 8 kHz 10 kHz ±9 dB in 3 dB step
  Limiter		Selectable: -30dB to OFF (0 dB) in 6 dB steps
  Antenna Input		SMA type, 50 ohms
  Operating Temperature Range		-5℃ to +45℃ (23℉ to 113℉) Battery performance may be reduced at very low temperatures.
  Dimensions		64 mm (2.5 )×23 mm (0.91 )×82 mm (3.2 ) (W×D×H)
  Weight		102 g (3.6 oz) (without batteries)
  Accessories Included		ATH-E40
  Battery Current Life		4 to 6 hours (alkaline); 5 to 7 hours (Ni-MH, 1900 mAh); 11 to 13 hours (Lithium) Depending on battery type, usage, volume level and environmental conditions.
  Battery Type		3 V DC (two 1.5 V AA) (not included)

  Title	Default Title